6️⃣ Rinse

With this module, the laundry detergent suds are rinsed from the laundry. The machine reverses to the specified values of the previous module "Wash mechanism".

⚙️ Parameter	🛠️ Options	💡 Description	🔄 Default Value
Rinsing level [49 - 240mm]	N/A	At the start of the module "Rinse", the dispensing of the water begins and continues until the desired rinsing level is reached. If this level falls below a hysteresis value during the course of rinsing, water will be re-emitted until the rinse level is reached again.	113mm
Water type	N/A	With each type of water, it is possible to select which chamber, or more specifically which valve, should be used to fill up the water level.	Cold_Hard
Water type	Cold_Hard	Water is filled through the pre-wash chamber.	Cold_Hard
Water type	Cold_Direct	Water will be filled through direct inflow.	Cold_Hard
Water type	*Cold direct warm	See "Help/Instuctions" -> Water type for more information.	Cold_Hard
Water type	*Cold direct rear	See "Help/Instuctions" -> Water type for more information.	Cold_Hard
Rinsing time [0 - 20min]	N/A	Time of the entire rinsing time including water inflow.	4min
Rinsing stop	Off	There is no rinsing stop setting in this module.	Off
Rinsing stop	On	This is executed when the rinsing stop option is selected additionally on the machine on the option screen.This function causes the wash program to stop at the end of a rinsing module. In the middle of the drainage cycle, a rinsing stop is indicated by a flashing "rinsing stop" on the display. The laundry detergent remains in the rinsing water until the Start button is pressed.	Off