Skip to content

⚙️ Edit the Settings

Note

In the Schulthess standard program (<400), the parameters for laundry detergent pumps, dosing, and dispensing can only be parametrised and modified in this module type (laundry detergent).

Here, you can edit the liquid detergent settings by setting up the values for Detergent Pump A and Detergent Pump B.

Note

The default values for Detergent Pump A are 1, and for Detergent Pump B are 1.

Tip

You can select the detergent pump value from 1 to 14 Max.

Also, You can set the Dosage A, Dosage B, Rinsing in Time values for each machine size.

⚙️ Parameter 💡 Description 🔄 Default Value
Detergent pump A [1 - 14] The pump for the first laundry detergent can be selected. 1
Detergent pump B [1 - 14] The pump for the second laundry detergent can be selected. 1
Dosing A [0 - 120s] The duty cycle for the first pump can be selected. 0s
Dosing B [0 - 120s] The duty cycle for the second pump can be selected. (The pump remains closed at 0s) 0s
Rinsing-in-time [0 - 120s] The dispensing time can be selected. This is for the internal and external dosing. (The pump remains closed at 0s). The water intake time has a direct influence on the displayed program time. 0s

Edit the liquid detergent settings